If you’re a beginner at dirt biking, you might be wondering how to ride a dirt bike with a clutch. The good news is that with a bit of practice and guidance, you can easily learn to ride a dirt bike with a clutch, even if you’re a beginner. In fact, using the clutch can actually help you to have better control over your motorcycle. When you engage the clutch, it acts as a brake for the rear wheel, allowing you to slow down and make turns more easily. Additionally, using the clutch can keep your dirt bike from moving forward when you’re stopped, preventing it from rolling away.
To use the clutch, you’ll need to hold it down with your left hand and shift gears with your right hand. Before hitting the trails, it’s important to get the right gear, including a helmet, gloves, and a protective vest. And of course, practice makes perfect, so be sure to spend some time practicing on the ground before heading out on your dirt bike adventure. In this post, we’ll walk you through the steps to help you ride a dirt bike with a clutch, so you can feel confident and in control while out on the trails.
Choose the Right Dirt Bike:
Choosing the right dirt bike is essential to ensure a safe and enjoyable ride. There are several factors to consider before buying a dirt bike, including your experience level, body size, intended use, and budget. For beginners, it’s generally recommended to start with a smaller engine size, such as a 125cc or 250cc, to get comfortable with the bike’s handling and power. It’s also crucial to take into account your body size and the type of riding you plan to do, such as motocross or trail riding, to find a bike that fits your needs. Finally, setting a budget and sticking to it is essential to avoid overspending on features you don’t need.
Put The Dirt Bike In Neutral:
Putting the dirt bike in neutral is a simple process that is essential before starting the bike. To put the bike in neutral, first, make sure the bike is in a stationary position. Next, press down on the shifter until it clicks down into first gear. From there, gently tap the shifter up one or two times until it no longer clicks into gear. At this point, the bike should be in neutral, and the engine should not be engaged.
Put The Bike Into First Gear:
Putting the bike into first gear is the first step to start riding a dirt bike with a clutch. To put the bike into first gear, first, make sure the bike is in neutral, with the engine disengaged. Next, pull in the clutch lever with your left hand, which will disengage the engine from the transmission. Finally, press down on the shifter with your left foot until it clicks down into first gear.
Pull In The Clutch On The Dirt Bike:
Pulling in the clutch on the dirt bike is essential to disengage the engine from the transmission, allowing the rider to shift gears smoothly. To pull in the clutch, use your left hand to grip the clutch lever, which is located on the left handlebar. Gently pull the clutch lever towards the handlebar until it is fully engaged. At this point, the engine should be disengaged from the transmission, allowing the rider to shift gears.
Slowly Release The Clutch:
Once the bike is in first gear, and the clutch is engaged, the rider can start to release the clutch to engage the engine and start moving forward. It’s important to release the clutch slowly and smoothly to prevent stalling or jerky movements. Slowly release the clutch while simultaneously adding a bit of throttle with the right hand to engage the engine and start moving forward.
Know more: Best 150cc Bike For Beginners
Pull In The Clutch Before Moving Up Each Gear:
When riding a dirt bike with a clutch, it’s essential to pull in the clutch lever before shifting up each gear. This will disengage the engine from the transmission, allowing the rider to shift gears smoothly. To shift up each gear, pull in the clutch lever with your left hand, shift up with your left foot, and slowly release the clutch while adding throttle with your right hand.
Learn How To Ride A Dirt Bike With Clutch:
Learning how to ride a dirt bike with a clutch can be challenging but rewarding. It’s important to start with the basics, including choosing the right bike, putting the bike in neutral, putting the bike into first gear, pulling in the clutch, slowly releasing the clutch, and pulling in the clutch before moving up each gear. Additionally, getting familiar with the controller, including the clutch lever, brake lever, and throttle, is essential for safe and smooth riding.
Get Familiar With the Controller:
Getting familiar with the controller of the dirt bike is essential before starting to ride. The controller includes the clutch lever, brake lever, and throttle, which are all located on the handlebars. It’s important to know which lever is
Clutch in Both Directions:
Learning to use the clutch in both directions is an important skill to have when riding a dirt bike. This technique involves using the clutch to control the speed of the bike both when accelerating and decelerating. To use the clutch in both directions, you will need to first pull in the clutch while downshifting to a lower gear, then slowly release the clutch while giving the bike some throttle. This technique will allow you to smoothly and safely come to a stop when needed, or accelerate smoothly from a stop.
Brake and Accelerate:
Braking and accelerating are two essential skills when it comes to riding a dirt bike with a clutch. When it comes to braking, you will need to use both the front and rear brakes to slow down or come to a stop. It’s important to remember to use the clutch when braking to help prevent stalling the engine. Accelerating on a dirt bike with a clutch requires a combination of using the clutch and throttle. You will need to engage the clutch and gradually release it while simultaneously increasing the throttle to smoothly accelerate. With practice, you will become more comfortable and proficient at braking and accelerating on your dirt bike.
Learning how to ride a dirt bike with a clutch can be an exciting and rewarding experience for beginners. By following the steps mentioned in this guide, you can become more comfortable and confident in your dirt biking abilities. Remember to choose the right dirt bike for your needs, put the bike in neutral to start, and practice putting the bike into first gear while pulling in the clutch.
Once you are comfortable with first gear, you can start shifting up and down through the gears by pulling in the clutch before each shift. As you become more familiar with the clutch and controller, you can start experimenting with using the clutch in both directions to improve your control over the bike. Finally, don’t forget to practice braking and accelerating to keep yourself safe and in control while riding. With time and practice, you can become a skilled dirt bike rider with a clutch, ready to tackle any challenge that comes your way.
How do you start a clutch on a dirt bike?
Starting a dirt bike with a clutch requires putting the bike in neutral and pulling in the clutch lever located on the left handlebar. Then, push the start button or kick the Kickstarter to start the engine. Once the bike is started, slowly release the clutch lever while giving the bike some throttle until it starts to move forward.
Do you have to use the clutch every time you shift on a dirt bike?
Yes, it is highly recommended to use the clutch every time you shift on a dirt bike, especially for beginners. Using the clutch helps to disconnect the engine from the transmission, allowing for smoother and safer gear changes. Failing to use the clutch can cause the bike to lurch or stall, making it more difficult to control.
When should I use clutch on bike?
You should use the clutch on a dirt bike when shifting gears, starting the bike, coming to a stop, and slowing down. Using the clutch in these situations will help to ensure a smooth and safe ride, and prevent stalling or damaging the engine.
How do you shift without clutch?
While it is not recommended to shift without using the clutch, it is possible to shift gears without using the clutch by matching the engine speed with the transmission speed. This technique is known as “clutchless shifting” and should only be attempted by experienced riders who have a good understanding of their bike’s mechanics.
Should We Press Clutch While Turning?
It’s not necessary to press the clutch while turning a dirt bike, but it can be helpful in certain situations. Pressing the clutch while turning can help to prevent stalling or jerky movements when decelerating or coming to a stop. However, it’s important to note that using the clutch inappropriately while turning can cause the bike to lose traction and become unstable, so it should be used with caution.
How do you practice clutch control at home?
Practicing clutch control at home is a great way to improve your skills as a dirt bike rider. One way to practice is to set up a small obstacle course in an open area and practice riding around it while controlling your speed using the clutch. You can also practice starting and stopping your bike in a controlled environment to improve your clutch engagement and release skills. Additionally, practicing shifting up and down through the gears while using the clutch can help you become more comfortable with this essential skill.
How do you know when to shift gears on a dirt bike?
You should shift gears on a dirt bike based on your speed and the terrain you are riding on. As a general rule, shift up to a higher gear when you reach about 50-60% of your bike’s maximum RPM, and shift down to a lower gear when you need to slow down or climb a hill.
What should you do if you stall a dirt bike while using the clutch?
If you stall a dirt bike while using the clutch, simply pull in the clutch lever and start the bike again. Make sure to put the bike in neutral before starting it, and then follow the steps for starting a bike with a clutch that we discussed earlier.
What should you do if you experience clutch slipping on a dirt bike?
If you experience clutch slipping on a dirt bike, it may be due to worn or damaged clutch plates. You should take the bike to a mechanic for a proper diagnosis and repair. In the meantime, you can try adjusting the clutch cable or replacing the clutch plates yourself if you have the necessary skills and tools.